多功能膠體磨-研磨機的管道磨泵型應用的研磨泵,粉碎型研磨機由初級高速剪切、分散、混合、攪拌推進至第二級至三級精細粉碎和研磨階梯過程，昊星膠體磨甚至有第四級由轉定子根據處理介質和工況流程不同而構造隨之變化組成。膠體研磨機分散研磨盤和盤頭的設計也很好地滿足不同粘度的物質以及顆粒粒徑的需要。在線式的定子和轉子（盤頭）和批次式機器的工作頭設計的不同主要是因為在對輸送性的要求方面，特別要引起注意的是：在粗精度、中等精度、細精度和其他一些工作頭類型之間的區別不光是指定轉子齒的排列，還有一個很重要的區別是不同工作頭的幾何學特征不一樣。狹槽數、狹槽寬度以及其他幾何學特征都能改變定子和轉子工作頭的不同功能。根據以往的慣例，依據以前的經驗指定工作頭來滿足一個具體的應用。在大多數情況下，機器的構造、材料選用是和具體應用相匹配的，因而它對製造出新穎實用產品是很重要。當不確定一種工作頭的構造是否滿足預期的應用。
隨着科學施肥和養殖業興起，腐植酸液體水溶肥研磨泵(多功能研磨機),復合液肥粉碎型研磨機,漿料管道分體式泵型膠體磨的超高速分散研磨機JMF漿料研磨分散設備是研磨機和分散機組合而成的研磨機泵型的高科技產品。制備腐植酸由溶解罐通過管道研磨泵與預儲罐連接,管道上設有膠體磨研磨泵.通過該系統研磨+分散的四級高速研磨分散機-多功能膠體磨由具有精細度遞升的多級膠體磨鋸齒突起和凹槽。定子可以無限制的被調整所需要的與轉子之間的距離。在增強的流體湍流下，凹槽在每級都可以改變方向。生產的肥料不沉澱,不分層,不絮凝,微粒細小,適合滴灌,微灌,噴灌等現代設施農業和魚蝦漿魚粉廠魚漿設備，魚蟹漿生產設備，蟹膏醬漿機器，脫脂魚粉車間，魚溶漿(酶解魚粉)車間，精鍊魚油車間，從鮮魚加工成魚粉，魚溶漿(酶解魚粉)，精鍊魚油的蝦漿、魚溶漿、魷魚膏、魚漿(粉)、魚餌、鱗蝦活性多肽、鮮蝦香精、飼料的飼料、魚粉、魚餌生產。
昊星管線式研磨分散機(泵)JMW、JPW、JPF系列用腐植酸液體水溶肥研磨泵,復合液體肥料粉碎腐植酸水肥膠體磨&研磨泵,粉碎型研磨機,膠體磨的返流式膠體磨, 煤焦油渣研磨泵,煤焦油和重油分散研磨泵，它能使乳化和分散效果較常規膠體磨不能處理的而進一步提高機械性能。這種新型膠體磨結構緊湊,堅固。由於整機為封閉式管道在線分散、粉碎、均質和研磨運行,因此防止了週圍空氣進入介質中,而且機器處理速度很快，剪切間隙非常小，這樣當物料經過的時候，形成的摩擦力就比較劇烈，結果就是通常所說的濕磨。定轉子被製成圓椎形，具有精細度遞升的多級鋸齒突起和凹槽。定子可以無限制的被調整到所需要的與轉子之間的距離。在增強的流體湍流下，凹槽在每級都可以改變方向。高質量的表面拋光和結構材料，可以滿足不同行業的多種要求。
工程應用案例: 智能低溫膠體磨組合設備JM-FBF140-2Z應用臺灣上工植物原生態研磨粉碎制劑工程；HSG系列智能數控低溫(直冷式)均化研磨成套設備用在聚睿（杭州）生物科技有限公司、浙江億農優鮮農業生態科技發展有限公司生物面膜項目和贛南海欣藥業股份制備豬脾臟制備含多肽、氨基酸和多核苷酸混合物的轉移因子口服溶液;特製膠體磨用於浙江豐安生物製藥年產6噸胰蛋白酶、脾氨肽、雙向免疫調劑工程；JM-W300AC55KW納米錐體磨-石墨烯研磨機應用於貴州鼎璽烯材高科技有限公司是國內年產量100噸石墨烯生產線，採用的是物理剝離法，大限度保留石墨烯納米材料特性；JM-W200AB-F泵型管線式耐高溫210℃多功能研磨機，應用於嘉興北化年產量6000噸新型防老劑SPPD、多功能流動劑LT-13、交聯劑、無鋅化活性劑等研磨分散粉碎精細處理和金山化工模量增強劑HMZ、均勻劑A78等橡膠助劑項目；耐腐蝕耐磨特殊鋼精製硬質不鏽鋼JM-W250AD37型應用OSC Siam Silica CO.，Ltd.、美國陶氏、上海凱賽、中國林業科學研究院林產化學工業研究所與江蘇強森生物能源成果轉化項目活性炭、碳酸鈣等新材料項目工程；JM-W250AD-2/4應用於中海亞化學年生產3000噸吸附式調溫材料項目和中石化北京燕山催化劑廠、杭州凱明催化劑股份等催化劑化工工程項目；JM-W180AC用於東莞鑽脂、中石化重慶分公司、一坪潤滑油、納拓(上海)潤滑技術的和非牛頓流體合成潤滑脂制備;
產品優點︰
Titanium High-Speed Grinding Machine (New Colloid Mills) Hao Star is committed to the development of large high-speed grinding machine colloidal mill Colloid Mill made great scientific and technological fruits, such as the patented new products: Multi-purpose grinding machine using a special dynamic seal (using a number of patented technologies), No material may be transferred under dry and will not damage dynamic seal and mechanical properties, maintenance rate is low, the friction power is small, grinding, dispersion fineness are "2-micron, the effect is good, and high efficiency. The machine spindle speed of up to 2000-3500 per minute forward, grinding line speeds of up to 1200-4500 meters per minute. Is mainly used for fineness demanding, difficult ground, scattered materials, completely replace the three-roll machine, imported grinding machine, heterogeneous machines and other equipment, our factory to develop new products Titanium Grinder SSJM-W250Ac-2; SSJM-W320Ac -2; SSJM-W400Ac-2, and other special models is currently the only instead of imported grinding machine or sanding machines, used in high-grade titanium dioxide - Titanium Dioxide (active titanium dioxide) on the preparation process, the production efficiency is the above-mentioned similar products several times, can significantly lower production costs, but the grains were uniform, clean easily change color, no grinding impurities. Can be widely used in: chemical industry, food industry, daily chemical industry, pharmaceutical industry, titanium dioxide industry, ceramic industry, bio-engineering and other fields, spearheaded the introduction of Seven Star Dairy Equipment Factory manufactured titanium dioxide slurry of the wet ultrafine particles specific grinding Machines: Titanium grinding machine SSJM-W250Ac-2 colloidal series, are: Haopu Titanium, Titanium simexco, Panzhihua titanium sea, Dong Jia Group, Gimpo Group, Nanjing Titanium Dioxide and other Chinese manufacturers used by leading enterprises and get users.
Seven companies for road bitumen industry, has developed the world's most cutting-edge products, modified bitumen mixture dispersed closed continuous grinding machine, Colloid Mills series and complete sets of production equipment to improve the traditional equipment of space occupied by large, high energy consumption, low efficiency drawbacks, in order to low power consumption, small space, high-quality, highly efficient integrated solution to replace the asphalt road and bridge has been widely used in the production process. Especially in the EVA / SBA mixed decentralized aspect of the product to achieve at the highest 380 ℃ and 16Bar under conditions of continuous mixing polymer and asphalt, asphalt maximum feed capacity of 35 tons / hour, the corresponding EVA / SBS maximum feed capacity will be increased to 8 tons / hour, and, at the same time the completion of modified asphalt, high-speed shearing, in order to achieve high standards of uniformity and fineness.
